The Unique VERIS Accelabar® Flow Meter
AN IDEAL PIPING SOLUTION
The VERIS Accelabar® is a unique flow meter that combines two differential pressure technologies to produce performance never before attainable in a single flow meter. The VERIS Accelabar® is capable of measuring gases, liquids, and steam at previously unattainable flow rate turn-downs with no straight run requirements.
ENGINEERING SPECS
- Liquids, Gases, and Steam
- Verified flow coefficients
- Accuracy up to ±0.5% of rate over entire recommended flow range
- Repeatability: ±0.05% over entire recommended flow range
- Capable of extended turn-downs in f low rate
- No straight piping run requirements
- Mass or Volumetric flow
- SS316 meter body and sensing element
- 1” – 12” in-line body sizes
- Up to ANSI600 standard & ANSI2500 upon request
How the VERIS Accelabar® Works
The VERIS Accelabar® combines a unique toroidal nozzle design with the VERIS Verabar® averaging pitot tube. The nozzle’s patented “settling distance” design accelerates, linearizes, and stabilizes the fluid’s velocity profile. The VERIS Verabar® located within the nozzle accurately measures that velocity profile. The nozzle also significantly increases the differential pressure output, thus increasing the operating range (turn down) of the VERIS Accelabar®. The VERIS Accelabar® has a linear flow coefficient with an accuracy of up to ±0.50% on actual reading.
FEATURES
- No calibration required
- Ready to install
- Special application design capabilities
